We have completed 1 order for 5 ton overhead crane from UAE. This is a European style single girder overhead crane, we have matched ABM & Siemens motor for our customers. In addition to this, there are P22 Rails with bolted clamps and welding plates and a 6mm²Seamless bus bar system

Single Girder Overhead Crane parameters
Rated capacity: 5 ton
Span: 18m
Lifting height: 7m
Power supply: 480V 60Hz 3P
Remote control
ABM motor for hoist trolley
Siemens motor for crane travelling
Technical information
Lifting capacity t 5
Lifting height m 7
Span m 18
Speed Cross traveling speed m/min 2-20 (inverter control)
Crane traveling speed 2-20 (inverter control)
Lifting speed 0.7/4.0 (double speed)
Working class / FEM 2M
Power supply V/Hz/Ph 480/60/3
Cross traveling power KW 0.55
Crane traveling power 0.55*2
Hoisting power 1.2/7.6
Total power 10.45
Max wheel load KN 61.9
Weight of main girder KG 4400
Total weight 6350
Protection class / IP55
Insulation grade / F
Ambient temperature / -10℃~+40℃
Anti-collision system / Included
Phase protection relays / Included
Limit switch / Included
Voltage Low Protect device / Included
Emergency stop action / Included
Ground fault protection / Included
Short-circuit protection / Included
Over-heating protection / Included
Power-off protection / Included
Over-current protection / Included
Overload protector / Included
Top Quality Buffer / Included
Country of origin / China
Rail Specification

Type Top Width(mm) Bottom Width(mm) Height(mm) Weight(kg/m)
P22 50.8 93.66 93.66 22.3
Overhead Crane Finished Installation
5t European-spec Single Girder Overhead Crane

overhead crane processing

(The above picture is for reference to crane model only)

QD type hook bridge crane is a general-purpose bridge crane for trolleys. The crane relies on the longitudinal movement along the direction of the supporting track on the driving beam of the workshop, the lateral movement of the trolley and the lifting of the hook to realize the working process. The common lifting capacity is 5 tons-600t , working level A3A4A5-A8. There are three types of bridge crane operation modes: ground control, control room control and remote control for users to choose.

A5 level is suitable for general machining and assembly workshops, metal structure workshops, mechanical maintenance workshops, etc., where the workload is not very heavy;

A6 and A7 grades are suitable for occasions with frequent work or continuous production or continuous handling, and can also be used as shop-lifting and hoisting in metallurgical and foundry workshops; the operating environment temperature is -20-40 ℃, and the relative humidity is ≤85%;

5t European-spec Single Girder Overhead Crane (ABM& Siemens motor) For Sale To UAE