HD overhead crane procurement parameters
Order time: 2021.10.18
Lifting capacity: 10 ton
Lifting height: 6 m
Span: 12.5 m
Working voltage: 440v/60hz/3p
Order content: HD 10 ton overhead crane
Exporting country: Philippines
MHO gantry crane procurement parameters
Order time: 2021.10.18
Lifting capacity: 10 ton
Lifting height: 3.44 meters
Span: 7.6 meters
Working voltage: 230v/60hz/3p
Order content: MHO 10 ton Gantry Crane
Exporting country: Philippines
This is the order for overhead cranes and gantry cranes sold to the Philippines in 2021. The customer purchased one HD 10-ton overhead crane and one MHO 10-ton gantry crane from our crane factory. Both of these cranes are European electric hoists. We configured two NR European electric wire rope hoists for the customer. After confirming the design drawing with the customer on December 16, we placed an order with the factory on December 17. On February 17, 2022, the customer added two remote controls. By February 25, 2022, the factory had completed all the production tasks of the order. On March 16, 2022, we sent our products to the Philippines. The two cranes will be used in a steel factory in the Philippines. The atlas shows some details of each component of overhead crane and gantry crane in the factory. If you want to know more about overhead crane and gantry crane, or the latest price of 10 tons overhead crane and 10 tons gantry crane, please contact us.

HD Overhead Crane Introduction
HD crane is a kind of low headroom crane, usually used in factory workshops with low space height, which can effectively use the space height and increase the lifting height.

The HD electric single-girder crane is independently developed and designed on the basis of introducing advanced European design and manufacturing technology and combining the latest domestic standards such as GB3811-2008 and JB/T1306-2008. The appearance is beautiful, and the driving mechanism adopts KONE three-in-one reducer (hard tooth surface reducer, frequency conversion brake motor), which is completely comparable to similar European products in terms of appearance and technical performance. Its superior performance is reflected in the mature application of modular design, frequency conversion speed regulation, automatic detection and other technologies, and various protection functions such as overload protection, overcurrent protection, and voltage loss protection make the electric single beam more perfect.

HD electric single-girder crane is suitable for working in the environment conditions of working level A3～A5, working environment temperature -25℃～+40℃, relative humidity ≤85% and no flammable, explosive or corrosive medium. The lifting capacity is 1-16 tons, and the span is 7.5-25.5 meters. The crane power supply is three-phase AC with a rated frequency of 50Hz or 60Hz. The rated voltage is 220V ~ 660V. The upper and lower limits of the allowable voltage fluctuation of the motor are ±10%, and the internal voltage loss of the crane is not more than 3%.

MH Electric Single Girder Gantry Crane
MH type electric single-girder gantry crane is mainly composed of steel structure, operating mechanism and electric control part. It is a small and medium-sized rail-operated crane used with CD single-speed, MD double-speed, and HC square electric hoists.

Electric single girder gantry crane specifications and models:

Single girder gantry crane model: MH type;

Single girder gantry crane specifications: 1 ton, 2 ton, 3T ton, 5 ton, 10 ton, 16 ton, 20 ton (non-standard customization is available);

Electric single girder gantry crane use environment:

The electric single-girder gantry crane is mostly used for loading and unloading or grabbing materials in open places and warehouses. The working environment temperature is -20°C-40°C. It is forbidden to use it in flammable and explosive environments. If it needs to be used in a special environment, it can be customized by non-standard design. .

Operation mode of electric single beam gantry crane:

The single-girder gantry crane has three modes: ground control, ground wired handle operation following the movement of the hoisting object, cab control, cockpit button operation with a wide view, remote control control, and wireless remote control operation without site restrictions.

Features and advantages of electric single beam gantry crane:

1. Simple design: reasonable, light weight and low cost;

2. Easy installation: the bottom beam is connected with the high-strength bolts of the bracket, the main beam is inserted into the sleeve arm for the outrigger, and the electric hoist is hung on the I-beam; 3. Easy operation: safe and reliable, floor trough, hook, speed can be controlled at will , covering all jobs;

Custom-made electric single-girder gantry crane:

For custom-made gantry cranes, please inform us of the following data, so that our electric single-girder gantry crane manufacturers can confirm your needs faster! 1. Lifting capacity;

2. Span (track center to guide rail center); 3. Lifting height (hook center grounding);

4. If overhang is required, please provide the length of overhang);

5. Do you need guide rails and cables? (Please provide the running length); 6. Other special requirements (working environment, external dimensions);

10t overhead crane and 10t gantry crane sold to the Philippines in 2021