In the previous part of this series, we showed you how to select and choose the hardware components needed to build a computer.In part two of this series, we will show you how to assemble those component devices together.Before you start, you should take a look at how to set up a good working area.Choose the tables that fit your physique.Make a table in the light and airy areas of the room and another important thing is time.Make sure you have at least half a free day to finish our work today, that is, assembling hardware devices together.This can be considered one of the most important steps of the whole process.It directly affects whether or not you can get the job done smoothly.First, it is indispensable to have a screwdriver with many heads of different sizes and edges.You may need an extra anti-static bracelet (pictured below).

These small metal clamps can be clamped to the computer case to be grounded manually while you are working, avoiding short-circuit and electric shock.Honestly, it is rare for a static shock to actually damage parts of the PC.However, being cautious, if your family is available, then the crime is not used!The tape will of course be indispensable, and you should also prepare a small bowl, or preferably a refrigerator ice tray with small boxes to place the screws in each size.In addition, you should also prepare an electric tester to ensure your safety.

First, carefully examine your computer tree.For what?In order for you to understand the layout of the computer compartment, see what is the main compartment containing the motherboard, where to place the hard drive (HDD) and SSD, or the back slot for the motherboard and compartment port. Where exactly does the graphics card extension . In summary this step is also very important, giving you a general overview and then gradually forming ideas.If you are unsure about any location on the computer tree, check the instructions that came with it (or download the soft copy on the manufacturer's website, or refer to the information on the Internet). If necessary, prepare additional pen and paper to make note of the points to be aware of.

You may notice that the computer tree being used as an illustration in this article may seem strange.That's actually the Thermaltake P3 computer plant.It has a slightly monotonous design with an acrylic case, designed to reveal, or rather to show off all the components in the system and especially very breathable, you won't need any wings. What is the radiator fan.The reason for choosing this 'expose' CPU is to make it easier for you to understand the components of the CPU tree and how they are installed in the correct position.

Let's get started on the job.Now, we will insert the CPU and RAM into the motherboard before installing the motherboard into the tree, simply because doing so is easier than installing the CPU and RAM after the motherboard has been fixed. right place.Remove your motherboard from the box, place it on a smooth surface, do not access the channel, and make sure the motherboard plane is completely uncharged.Since the CPU is quite small, in this step you will also need to be very careful and focused, and remember to try not to touch the electrical contacts at the bottom of the chip.

Silicone sealant is a popular product for sealing small holes in plastic and other materials. It is available in a variety of colors, including clear, to make it easier to see the area that has been sealed. Silicone sealant is also easy to apply and can be used on a wide range of materials.

Silicone sealants are a popular choice for users looking for a long-lasting solution to sealing cracks, joints, and other areas of a home's exterior. They come in a variety of colors, textures, and brands, so it's important to find the perfect one for your needs.

Haohong Hardware Silicone Sealant is a sealant for metal hardware and plastic parts. It is composed of silicone rubber and a silica filler, which makes it resistant to moisture, oil, and corrosion. Haohong Hardware Silicone Sealant can be used to secure screws, bolts, washers, and nuts in place; it is also effective in sealing cracks in plastic parts.